Wood is the ideal flooring - it offers excellent thermal insulation, produces natural warmth and looks beautiful. The main disadvantage of most people is that the flooring material absorbs moisture and so lazy and tends to be unusable. This is definitely not going to happen until the wood panels are well made. Insert wooden floor is not a particularly difficult task - it is sufficient to identify the traditional tools in every home and some extra suppliesTo achieve the desired results. It 'important that the boards you use, you are ready. Here are 3 easy steps how to put hardwood floors.
First, the ground covered with a type of insulating material. Experts recommend the use of layers of asphalt felt (a 15-pound is not good). They should overlap by about 3 cm and should hide with a stapler. Note the positioning of the beamsvertical panels should be brought to them.
Measure the space is the length and width from wall to wall on the center line, going to the benchmark through the forest floor deposition process of being created. Mark the center line with white chalk. Select Start from a wall - preferably the one facing the door to allow more comfort. Measure a distance of 0.5 cm from the wall and draw the line with chalk. This space should be left blank to predict the extent of woodbecause the internal environment. Finally, the gap will be covered by a shoe base.
Select the tab in place first and longest holes for 1.5-inch nail in each of their respective holder. Then the nail on the beams in series with a hammer. The placement of the holes on the wall, so that they are then covered from the base of shoes. It 'important that the first three rows of nails by hand. Nail holes for 1.5-inch to 45 to 60 degrees through the languageabove the bar. The holes should be drilled from each side of the table and with a distance between each 10 inches. re-nail with the hammer on the board.
For entry into the next rows, nails in wood floors can be a flooring nailer that gives you the right angle for placement of the holes and hammering. He is on the table, his tongue out and if it is stable, easy to strike for the 2-inch nail through the tongue Hammerand the carrier. Nails should be hammered by the respective bar and half way between the beams in the sub-floor space to ensure stability. It 's a good idea, every second line with the previous setting, with a small piece of wood board, attach it to the series and rap with a hammer, to allow placement closer.
Visit : Here is the ozone-free ionizer with active purific find more about mustache trimmer , cast iron skillet and Dehumidifier
